1:1 BalUn DIY kit 150 Watt

 27,00 Incl. VAT

(0 customer reviews)

Complete 1:1 BalUn DIY kit for dipole antenna’s.

150 Watt, with solid tensile stools, all stainless steel

With a handy fixing plate for the toroid, so no longer necessary for gluing.

Click here for an extensive building manual

In stock

Category: SKU: 1:1BALUN150W Tag:

Description

Complete 1:1 BalUn DIY kit for dipole antenna’s.

150 Watt, 1:1 BalUn, with solid tensile stools. With a handy fixing plate for the toroid, so no longer necessary for gluing.

The dipole antenna still remains the primal antenna. Certainly in a fixed setup this antenna has its advantages. The antenna is symmetrical so that the noise level will in many cases be quieter compared to asymmetric antennas. By using a good BalUn, Common mode current are prevented, which also reduces interference from your direct environment. The symmetrical properties do not require Earth or capacity.

The main reason for using a BalUn is to make sure that the coax cable is not part of the antenna system and that it will radiate undesirable. This has all sorts of nasty effects, think of: interference, EMI, RFI disrupted radiation pattern of the antenna, restless noise level. This last point is because not only does the coax cable’s shield radiate when you transmit, but the shield also works as a receiving antenna.

Click here for an extensive building manual

This kit includes:

  • IP65 enclosure 82x80x55 mm
  • Ferrite toroid Amidon FT140-43
  • Winding wire 22 AWG – 4x 65cm PTFE 19 x 0.15 mm copper “Silver plated”
  • PL 259 Chassis
  • Toroid mounting plate
  • Stainless steel M3 6mm screws 4x
  • Stainless steel M3 Spring washer 4x
  • M3 Cable lug
  • 2x M5 Cable lug
  • 2x stainless Steel (A4) M6 eye (Strain relief)
  • 2x Stainless Steel M6 Nut
  • 2x Stainless steel M6 washer
  • 2x stainless steel M6 Spring washer
  • 2x Stainless Steel M5 Bolt 25mm
  • 2x stainless steel M5 wing nut
  • 4x Stainless Steel M5 Nut
  • 4x Stainless steel M5 washer
  • 2x stainless steel M5 Spring washer
  • 4x stainless steel M5 toothed washer
  • 4x stainless steel M3 Bolt 12mm
  • 4x Stainless Steel M3 Nut
  • 4x Stainless steel M3 washer
  • 4x stainless steel M3 toothed washer

Reviews

There are no reviews yet.

Show reviews in all languages (2)

Be the first to review “1:1 BalUn DIY kit 150 Watt”

Your email address will not be published. Required fields are marked *

Post comment

You may also like…