mAT-M200 Antenna Tuner, 200 watts (includes Icom/Kenwood cable)

Description

mAT-M200 Antenna Tuner

The mAT-M200 is an automatic antenna tuner intended for use with modern Icom and Kenwood transceivers. The antenna tuner works with Icom transceivers that support AH-3 or AH-4 Icom tuner. The mAT-M200 Antenna Tuner works with Kenwood transceivers that support AT-250 and AT-300 Kenwood tuner. Compatible Icom devices include: IC-706, IC-703, IC-718, IC-7000, IC-7100, IC-7200, IC-7300, IC-7400, IC-7410, IC-746, IC-756, IC-7600, IC7610 The operation works the same as with an Icom tuner. Compatible Kenwood devices include: TRC-80, TK-80, TS-2000, TS-50, TS-450, TS-480 SAT, TS-570, TS-590, TS-850, TS-870, TS-890, TS-990. The controls work the same as with a Kenwood tuner. The mAT-M200 has a range of 1.8 MHz to 54 MHz. The maximum acceptable PEP power is 200 watts. This applies to SSB and CW. For PSK, FM and Digimodes, the maximum acceptable power is 100 watts. It can tune virtually any coax-fed antenna. Use the HF kits ATU Choke BalUn to use the mAT-M200 for a symmetrical antenna. The antenna tuner has a wide tuning range, much larger than some other tuners, including the built-in tuners on many radios.

Operation

The mAT-M200 is connected to the transceiver via its tuner jack. The antenna tuner is operated from the transceiver. The tuner jack also powers the antenna tuner, so no external power supply is needed. Tuning occurs when the TUNE button on the front of the transceiver is pressed and held for one second. The mAT-M200 has 16,000 frequency memories. When you tune to or near a previously tuned frequency, the mAT-M200 uses “Memory Tune” to recall the previous tuning parameters in a split second. If no memory is available, the tuner performs a full tuning cycle and stores the parameters for recall from memory on subsequent tuning cycles on that frequency. In this way, the mAT-M200 “learns” as it is used and, over time, quickly adapts to previously used frequencies. The transceiver’s included control cable is approximately 1 meter long.

Specifications

• 0.1 – 200 watts PEP (SSB and CW)
• 0.1 – 100 watts Continuous (Digimodes, PSK, FM, FT8)
• 1.8 – 54 MHz frequency range
• 16,000 Memory Places
• 0.1 -5 second tune time (full tune)
• 0.1 second from memory (memory tune)
• >500 mA current usage
• Dimensions: 20 x 13 x 4 cm
• Weight: 0.8 kg
• including mAT-CI / mAT-CK control cable

Compatible with Icom:

• IC-706
• IC-703
• IC-718
• IC-7000
• IC-7100
• IC-7200
• IC-7300
• IC-7400
• IC-7410
• IC-746
• IC-756
• IC-7600
• IC7610

Compatible with Kenwood:

• TRC-80
• TK-80
• TS-2000
• TS-50
• TS-450
• TS-480SAT
• TS-570
• TS-590
• TS-850
• TS-870
• TS-890
• TS-990

User Manual

mAT-30 Operation_manual_en_v3.pdf