Description
mAT-30 Antenna Tuner
The mAT-Y200 is an automatic antenna tuner intended for use with modern YAESU transceivers. The mAT-Y200 Antenna Tuner works with YAESU transceivers that support an FC-30 , FC-40 or FC-50 YAESU tuner. Compatible devices include: FT-100,FT-857D,FT-897D,FT-450D,FT-891,FT-950,FT-991,FT-991A, FT-710, FTDX-3000, FTDX-10. The controls are the same as those of the YAESU tuner.
The mAT-Y200 has a range of 1.8 MHz to 54 MHz. The maximum acceptable PEP power is 200 watts. This applies to SSB and CW. For PSK, FM and Digimodes, the maximum acceptable power is 100 watts. It can tune virtually any coax-fed antenna. Use the HF kits ATU Choke BalUn to use the mAT-30 for a symmetrical antenna.
The antenna tuner has a wide tuning range, much larger than some other tuners, including the built-in tuners on many radios.
Operation
The mAT-Y200 is connected to the transceiver via its CAT/LINEAR connector. The antenna tuner is operated from the transceiver. The CAT/LINEAR connection also powers the tuner, so no external power supply is needed. Tuning occurs when the TUNE button on the transceiver is pressed and held for one second.
The mAT-Y200 has 16,000 frequency memories. When you tune to or near a previously tuned frequency, the mAT-Y200 uses “Memory Tune” to recall the previous tuning parameters in a fraction of a second. If no memory is available, the tuner performs a full tuning cycle and stores the parameters for recall from memory on subsequent tuning cycles on that frequency. In this way, the mAT-Y200 “learns” as it is used and, over time, quickly adapts to previously used frequencies.
The mAT-CY control cable of the mAT-Y200 provides control signals between the YAESU transceiver and the tuner. As the illustration shows, the control cable has two mini-DIN 8-pin plugs. Press and hold the [TUNER] key on the transceiver for two seconds to start tuning. Press [TUNER] quickly to bypass the tuner.
The transceiver’s included control cable is about 50 centimeters long. If it is desired to place the mAT-Y200 further from the transceiver than this cable length allows, a custom cable will need to be made or purchased.
The mAT-Y200 Antenna Tuner does not support YAESU FT-817/818.
Specifications
- 0.1 – 200 watts PEP (SSB and CW)
- 0.1 – 100 watts Continuous (Digimodes, PSK, FM, FT8)
- 1.8 – 54 MHz frequency range
- 16,000 Memory Places
- 0.1 -5 second tune time (full tune)
- 0.1 second from memory (memory tune)
- >500 mA current usage
- Dimensions: 20 x 13 x 4 cm
- Weight: 0.8 kg
- including mAT-CY control cable
Compatible with
- FT-100
- FT-857D
- FT-897D
- FT-450D
- FT-891
- FT-950
- FT-991
- FT-991A
- FT-710
- FTDX-3000
- FTDX-10
User Manual
mAT-30 Operation_manual_en_v3.pdf
Reviews
There are no reviews yet.